Capable of continuous heavy duty workloads, the Remco Professional Grade 3300 Series has built a reputation as a solid and reliable industrial performer. A completely sealed motor case and excellent durability allow the 3300 Series to deliver consistent and Professional Grade results for every job you give it.
INFORMATIONAL VIDEOS
ROLLMAX R440 SERIES
| PART NUMBER | DESCRIPTION |
|---|---|
|
R440C |
4 ROLLER, CAST IRON, CW ROTATION, 5/8″ SHAFT |
|
R440SS |
4 ROLLER, STAINLESS STEEL, CW ROTATION, 5/8″ SHAFT |
|
R441C |
4 ROLLER, CAST IRON, CW ROTATION, 1/2″ HOLLOW SHAFT |
|
R441SS |
4 ROLLER, STAINLESS STEEL, CW ROTATION, 1/2″ HOLLOW SHAFT |
- Maximum Flow Rate: 9.4 GPM
- Maximum Pressure: 150 PSI
- Maximum Speed: 2600 RPM
- Rotation: Clockwise
- Shaft Size: 5/8"
- Ports: 3/4" FNPT
| PSI | 1800 RPM | 2200 RPM | 2600 RPM |
|---|---|---|---|
|
00 |
6.5 |
8.0 |
9.4 |
|
20 |
5.8 |
7.0 |
8.5 |
|
40 |
5.1 |
6.2 |
8.0 |
|
100 |
4.5 |
5.6 |
7.5 |
|
150 |
4.0 |
5.5 |
7.3 |
ROLLMAX R660 SERIES
| PART NUMBER | DESCRIPTION |
|---|---|
|
R660C |
6 ROLLER, CAST IRON, CCW ROTATION, 5/8″ SHAFT |
|
R660SS |
6 ROLLER, STAINLESS STEEL, CCW ROTATION, 5/8″ SHAFT |
|
R660C-TAK |
6 ROLLER KIT, CAST IRON, CCW ROTATION, 5/8″ SHAFT, TORQUE ARM, CHAIN, MULTI-SPEED COUPLER |
- Maximum Flow Rate: 19.6 GPM
- Maximum Pressure: 150 PSI
- Maximum Speed: 1000 RPM
- Rotation: Counter Clockwise
- Shaft Size: 5/8"
- Ports: 3/4" FNPT
| PSI | 1800 RPM | 2200 RPM | 2600 RPM |
|---|---|---|---|
|
00 |
6.5 |
8.0 |
9.4 |
|
20 |
5.8 |
7.0 |
8.5 |
|
40 |
5.1 |
6.2 |
8.0 |
|
100 |
4.5 |
5.6 |
7.5 |
|
150 |
4.0 |
5.5 |
7.3 |
ROLLMAX R880 SERIES
| PART NUMBER | DESCRIPTION |
|---|---|
|
R880C |
8 ROLLER, CAST IRON, CCW ROTATION, 15/16″ SHAFT |
|
R880SS |
8 ROLLER, STAINLESS STEEL, CCW ROTATION, 15/16″ SHAFT |
|
R880C-TAK |
8 ROLLER KIT, CAST IRON, CCW ROTATION, 15/16″ SHAFT, TORQUE ARM, CHAIN, MULTI-SPEED COUPLER |
- Maximum Flow Rate: 24.5 GPM
- Maximum Pressure: 150 PSI
- Maximum Speed: 1000 RPM
- Rotation: Counter Clockwise
- Shaft Size: 15/16"
- Ports: 1" FNPT
| PSI | 540 RPM | 850 RPM | 1000 RPM |
|---|---|---|---|
|
00 |
13.0 |
20.0 |
24.0 |
|
20 |
12.4 |
19.8 |
23.3 |
|
40 |
11.6 |
19.1 |
22.4 |
|
100 |
10.0 |
17.4 |
20.7 |
|
150 |
8.5 |
16.0 |
19.3 |
ROLLMAX - REBUILD READY
Remco's RollMax Series can easily be serviced and rebuilt in a matter of minutes, the only tool required is a wrench. All of this is possible while the pump remains attached to the drive shaft and plumbing remains intact.
- Step #1: Loosen and remove the 4 cap bolts
- Step #2: Easily slide the pumps endplate off of the shaft. Be careful not to damage the shaft
- Step #3: Inspect and replace worn rollers as needed with our universal repair kits. Be sure to lubricate the shaft seal before reinstalling.
- Step #4: Carefully reinstall the pump endplate and cap bolts
- Step #5: RollMax is ready to spray
ROLLMAX COUPLERS
- RMC585410 - 5/8" Shaft, 540/100 RPM Multi-Speed, Cast Aluminum/Zinc, Set Screws
- RMC151651 - 15/16" Shaft, 540/1000 RPM Multi-Speed, Cast Aluminum/Zinc, Set Screws
- RC5858 - 5/8" Gas Engine Adapter Coupler, Set Screws
RMC585410
RMC151651
RC5858
ROLLMAX UNIVERSAL REPAIR KITS
- R440K - Repair Kit, 4 Max Rollers 1/2", Needle Bearing, 2 Lip Seals, O-Ring, Pill Key
- R660K - Repair Kit, 6 Max Rollers 3/4", Needle Bearing, 2 Lip Seals, O-Ring, Pill Key
- R880K - Repair Kit, 8 Max Rollers 3/4", Needle Bearing, 2 Lip Seals, O-Ring, Pill Key
R440K
R660K
R880K
ROLLMAX TORQUE BAR AND CHAIN
- RMTAC - Torque Bar and Chain (Rotation Prevention for PTO Mounted Pumps
